Ọnụ ala dị ala maka China Hydraulic Rotary Foundation Construction Drill Engineering Drilling Rig

Nkọwa dị mkpirikpi:

Rotary Drilling Rig bụ igwe holing maka iwu ntọala, ọ bụ akụrụngwa mkpokọ ọhụrụ nke na-etolite ngwa ngwa n'ime afọ iri gara aga ma toro ya dị ka igwe “Green Construction”.

A na-emepụta igwe na-agbagharị agbagharị Gookma dịka ọchịchọ ahịa siri dị.Gookma Rotary Drilling Rig na-agụnye ụdị 5 ugbu a, omimi omimi nke dị iche iche 12m, 16m, 21m, 26m na 32m, dayameta mkpọpu ala site na 1000mm ruo 1200mm, na-ezute ọtụtụ ihe achọrọ nke obere na ọkara piling oru ngo.


Nkọwa zuru oke

Mkpado ngwaahịa

anyị nwere ike ịnye ngwa ahịa dị elu, ọnụahịa ire ere na nkwado ndị ahịa kacha mma.Ebe anyị na-aga bụ "Ịbịara ebe a na-esiri ike ma anyị na-enye gị ọnụ ọchị iji wepụ" maka ọnụ ala dị ala maka China Hydraulic Rotary Foundation Construction Drill Engineering Drilling Rig, Anyị na-ekwe nkwa ịnwale ike anyị kacha mma iji napụta gị ngwaahịa dị elu na nke akụ na ụba. ọrụ.
anyị nwere ike ịnye ngwa ahịa dị elu, ọnụahịa ire ere na nkwado ndị ahịa kacha mma.Ebe anyị na-aga bụ "Ị na-abịa ebe a na-esiri ike ma anyị na-enye gị ọnụ ọchị iji wepụ" makaChina Rotary Drilling Rig, Anyị na-anabata ndị ahịa si n'ụwa niile na-abịa kwurịta azụmahịa.Anyị na-enye ihe ngwọta dị elu, ọnụ ahịa ezi uche na ezi ọrụ.Anyị na-atụ anya iji ezi obi wulite mmekọrịta azụmahịa na ndị ahịa si n'ụlọ na mba ọzọ, na-agbakọ ọnụ maka ọmarịcha echi.

Atụmatụ na Uru

Gookma rotary drilling rig na-agụnye ọtụtụ teknụzụ bụ isi, ọ na-eduga n'usoro nke igwe na-ebu ibu na obere.

1. Mkpofu apịtị dị elu

A na-arụ ọrụ mkpofu apịtị dị elu site na nhazi pụrụ iche nke isi ike.

Site na ike siri ike na ọsọ dị elu, ọ na-enweta ọtụtụ uru na ọnọdụ ọrụ niile, arụmọrụ na-arụ ọrụ bụ 20% dị elu karịa ngwaahịa ndị ọzọ.

Mkpofu apịtị dị elu

2. Visual Human-igwe Interface

Na visual mmadụ-igwe interface, ọ ọmụma ma ọ bụ na-arụ ọrụ ọnọdụ bụ visual, na-eme ka ọrụ ndị ọzọ kpọmkwem na mfe.

Akụkụ ndị bụ isi nwere ntọala igbu oge, na-eme ka ọrụ ahụ dịkwuo mma, belata akụkụ na-awụ akpata oyi, na ogologo ndụ igwe.

3. Nlekọta na ndozi dị mma

Nhazi Electromechanical, na-eme ka igwe na-arụ ọrụ dị mfe na nrụzi, ihe akaebe mmiri na nchekwa, na ntụkwasị obi dị elu.

Ntụgharị igwe mmadụ na-ahụ anya

4. Advanced Design

A na-emepụta igwe ahụ site na ngwanrọ na-emepụta ihe dị elu na ngwanrọ nyocha ike, ọ nwere ike igosi kpọmkwem mpaghara nyocha nrụgide nke nhazi ngwaahịa, ka ọ na-ebuli nhazi ngwaahịa.

5. Ọrụ nchekwa

Arụ ọrụ mmekọrịta nke eriri nloghachi, gbochie ịtọrọ ngwaọrụ mkpọpu na mberede.Mkpanaku a na-eji ngwaọrụ mgbochi ịkụ ọkpọ, nke nwere ọrụ onyonyo n'azụ.

Nhazi dị elu

6. Agile Mobility

Gookma model GR50 na GR60 rotary Drilling rig bụ nke kọmpat, obere nha, agile agagharị, nke dabara adaba maka ibufe na ịrụ ọrụ na oghere dị warara na nke dị ala, dịka iwu ụlọ ime obodo, igwu mmiri mmiri na oru ngo wdg.

7. Economy arụmọrụ

Ngwa ngwa na-arụ ọrụ ngwa ngwa, ogologo ndụ nke components, obere mmezi ọnụego, obere mmanụ ụgbọala oriri, na-eme ka igwe nke elu keukwu aku na uba arụmọrụ.

Agile Mobility

8. Nnyefe ngwa ngwa

Usoro mmepụta ihe ọkachamara na-eme ka mkpokọta mma na nnyefe ngwa ngwa nke igwe.

Nbunye ngwa ngwa

Ngwa

Gookma rotary Drilling rig na-etinye ọtụtụ ebe n'ọtụtụ ọrụ owuwu holing, dị ka okporo ụzọ, okporo ụzọ ụgbọ oloko, ogbugba mmiri n'ubi, akwa mmiri, ọkụ eletrik, nzikọrịta ozi, obodo, ubi, ụlọ, owuwu olulu mmiri wdg, ma na-enweta aha dị elu n'etiti ndị ahịa.

ngwa-1
ngwa-2
Ngwa

Line mmepụta

1 (4)
2 (1)
4 (1)


  • Nke gara aga:
  • Osote:

  • vidiyo

    GR503

    ● Ịgagharị ngwa ngwa

    ● Obere maka ịrụ ọrụ na oghere dị warara

    ● Maka olulu mmiri mmiri na ntọala ụlọ

    ● Omimi igwu ala 12m (40ft)

    1.The GR50 rotary drilling rig bụ nke ọhụrụ imewe, kọmpat Ọdịdị, .na a mara mma n'ozuzu anya.
    2.Small size, agile agagharị, ọ na-adaba adaba maka njem, adabara na-arụ ọrụ na warara na ala ebe dị ka uzo, ọwara, ụzọ ụgbọ oloko, ime ụlọ wdg.
    3.Equips na ama ika engine, ọ bụ nke ike ike, kwụsiri ike, obere mmanụ ụgbọala oriri, ala mkpọtụ, ike ịzọpụta na gburugburu ebe obibi nchebe.
    4..Na-anabata usoro hydraulic dị mma, nkwụsi ike dị elu, enweghị nkwụsịtụ, nnukwu torque na arụmọrụ dị elu.
    5. Kwesịrị ekwesị maka ala dị iche iche na ọnọdụ ala dị ka oyi akwa ájá na-asọpụta, silt stratification na ala mmiri wdg, izute dị iche iche ihe owuwu chọrọ.Ọ nwere ike ịgbawa nkume ihu igwe, ma ụzọ akọrọ na ụzọ mmiri mmiri nwere ike ịnakwere.
    6. arụmọrụ kwụsiri ike, ntụkwasị obi dị elu, ọnụego mmebi dị ala, mmezi dị mma na ịrụzi.

    Aha

    Rotary Drilling Rig

    Nlereanya

    GR50

    Injin

    Nlereanya

     

    YC4GB85-T22

    Ike

    Kw/rpm

    61/2200

    Sistemụ hydraulic

    Ụdị mgbapụta isi

     

    K3V63DT

    Oke nrụgide

    Mpa

    32

    Sistemụ nrụgide

    ike na-emesi ike

    KN

    140

    ike ịdọrọ kacha

    KN

    140

    Ịrụgide ọrịa strok cylinder

    mm (n'ime)

    1500 (59.1)

    Isi Ike

    Ntugharị moto

    ml/r

    107*1

    Oke mmepụta ike

    Kn.m

    50

    Ọsọ na-arụ ọrụ

    rpm

    22

    Ịtụba apịtị dị elu

    rpm

    65

    Chassis

    Obosara efere crawler

    mm (n'ime)

    500 (19.7)

    Ogologo chassis

    mm (n'ime)

    2800 (110.4)

    Ọsọ njem

    m (ft) /h

    3200 (10500)

    Ụdị moto na-eme njem

     

    TM18

    Mast

    Akaekpe na aka nri

    ogo

    ±5˚

    Ọchịchọ ihu

    ogo

    Ọchịchọ azụ

    ogo

    90˚

    Isi Winch

    Ụdị moto

     

    TM22

    Oke ibuli ike

    KN

    120

    Dayameta waya eriri

    mm (n'ime)

    20 (0.79)

    Ogologo eriri waya

    m (ft)

    20 (65.6)

    Na-ebuli ọsọ

    m (ft)/min

    85 (278.8)

    Winch inyeaka

    Oke ibuli ike

    KN

    15

    Dayameta waya eriri

    mm (n'ime)

    12 (0.47)

    Ogologo eriri waya

    m (ft)

    22 (72.2)

    Na-ebuli ọsọ

    m (ft)/min

    40 (131.2)

    Ọkụ ọkpọkọ

    Ọkpọkpọ akpọchi

    mm (n'ime)

    ø273 (10.8)

    Data arụ ọrụ

    Omimi mkpọpu ihe kacha

    m (ft)

    12 (39.4)

    Dayameta mkpọpu ihe kacha

    m (ft)

    1.0 (3.3)

    Ụgbọ njem

    Ogologo* Obosara* Ogologo

    m(ft)

    5.5*2.2*2.9 (18.1*7.3*9.6)

    Ibu

    n'arọ (lb)

    11500 (25360)

    Parameter ga-agbanwe na-enweghị ọkwa mbụ.

    GR505 GR504 GR502  GR506GR501

    vidiyo

    gr60 (3)

    1.The GR60 rotary drilling rig bụ nke ọhụrụ imewe, kọmpat Ọdịdị, .na a mara mma n'ozuzu anya.
    2.Small size, agile agagharị, ọ na-adaba adaba maka njem, adabara na-arụ ọrụ na warara na ala ebe dị ka uzo, ọwara, ụzọ ụgbọ oloko, ime ụlọ wdg.
    3.Equips na ama ika engine, ọ bụ nke ike ike, kwụsiri ike, obere mmanụ ụgbọala oriri, ala mkpọtụ, ike ịzọpụta na gburugburu ebe obibi nchebe.
    4..Na-anabata usoro hydraulic dị mma, nkwụsi ike dị elu, enweghị nkwụsịtụ, nnukwu torque na arụmọrụ dị elu.
    5. Kwesịrị ekwesị maka ala dị iche iche na ọnọdụ ala dị ka oyi akwa ájá na-asọpụta, silt stratification na ala mmiri wdg, izute dị iche iche ihe owuwu chọrọ.Ọ nwere ike ịgbawa nkume ihu igwe, ma ụzọ akọrọ na ụzọ mmiri mmiri nwere ike ịnakwere.
    6. arụmọrụ kwụsiri ike, ntụkwasị obi dị elu, nkwụsị ala, mmezi dị mma na ịrụzi.

    Aha

    Rotary Drilling Rig

    Nlereanya

    GR60

    Injin

    Nlereanya

     

    YC4A125Z-T21

    Ike

    Kw/rpm

    92/2200

    Sistemụ hydraulic

    Ụdị mgbapụta isi

     

    K3V63DT

    Oke nrụgide

    Mpa

    32

    Sistemụ nrụgide

    Ike nrụgide kacha

    KN

    140

    ike ịdọrọ kacha

    KN

    140

    Ịrụgide ọrịa strok cylinder

    mm (n'ime)

    2500 (98.5)

    Isi Ike

    Ntugharị moto

    ml/r

    80+80

    Oke mmepụta ike

    Kn.m

    60

    Ọsọ na-arụ ọrụ

    rpm

    22

    Ịtụba apịtị dị elu

    rpm

    65

    Chassis

    Obosara efere crawler

    mm (n'ime)

    500 (19.7)

    Ogologo chassis

    mm (n'ime)

    3650 (143.8)

    Ọsọ njem

    m (ft) /h

    3200 (10500)

    Ụdị moto na-eme njem

     

    TM22

    Mast

    Akaekpe na aka nri

    ogo

    ±5˚

    Ọchịchọ ihu

    ogo

    Ọchịchọ azụ

    ogo

    90˚

    Isi Winch

    Ụdị moto

     

    TM40

    Oke ibuli ike

    KN

    180

    Dayameta waya eriri

    mm (n'ime)

    20 (0.79)

    Ogologo eriri waya

    m (ft)

    33 (108.3)

    Na-ebuli ọsọ

    m (ft)/min

    85 (278.8)

    Winch inyeaka

    Oke ibuli ike

    KN

    20

    Dayameta waya eriri

    mm (n'ime)

    12 (0.47)

    Ogologo eriri waya

    m (ft)

    33 (108.3)

    Na-ebuli ọsọ

    m (ft)/min

    40 (131.2)

    Ọkụ ọkpọkọ

    Ọkpọkpọ akpọchi

    mm (n'ime)

    ø273 (10.8)

    Data arụ ọrụ

    Omimi mkpọpu ihe kacha

    m (ft)

    16 (53)/3 akụkụ ọkpọkọ

    21 (69)/4 akụkụ ọkpọkọ

    Dayameta mkpọpu ihe kacha

    m (ft)

    1.2 (4.0)

    Ụgbọ njem

    Ogologo* Obosara* Ogologo

    m(ft)

    9.2*2.4*3.15(30.2*7.9*10.4)

    Ibu

    n'arọ (lb)

    15000 (33070)

    Parameter ga-agbanwe na-enweghị ọkwa mbụ.

    gr60 (1) gr60 (2) gr60 (3)gr60 (4) gr60 (5) gr60 (6) gr60 (7)

    5202

    1.The GR80 rotary drilling rig bụ nke ọhụrụ imewe, kọmpat Ọdịdị, .na a mara mma n'ozuzu anya.
    2.Equips na ama ika engine, ọ bụ nke ike ike, kwụsiri ike, obere mmanụ ụgbọala oriri, ala mkpọtụ, ike ịzọpụta na gburugburu ebe obibi nchebe.
    3..Na-anabata usoro hydraulic dị mma, nkwụsi ike dị elu, enweghị nkwụsịtụ, nnukwu torque na arụmọrụ dị elu.
    4. Kwesịrị ekwesị maka ala dị iche iche na ọnọdụ ala dị ka oyi akwa ájá na-asọpụta, silt stratification na ala mmiri wdg, izute dị iche iche ihe owuwu chọrọ.Ọ nwere ike ịgbawa nkume ihu igwe, ma ụzọ akọrọ na ụzọ mmiri mmiri nwere ike ịnakwere.
    5. arụmọrụ kwụsiri ike, ntụkwasị obi dị elu, nkwụsịtụ dị ala, mmezi dị mma na ịrụzi.
    6.The isi windlass bụ nke ụzọ abụọ confluence, ibuli na ala ala bụ ngwa ngwa na oru oma,
    iji belata oge ọrụ na ịbawanye arụmọrụ.
    7.Use elu esemokwu ígwè efere, dịkwuo ike nke dum igwe na ọ bụ
    arụmọrụ.

    Aha

    Rotary Drilling Rig

    Nlereanya

    GR80

    Injin

    Nlereanya

     

    YC6J180L-T21
    Ike

    Kw/rpm

    132/2200

    Sistemụ hydraulic

    Ụdị mgbapụta isi

     

    K3V112DT
    Oke nrụgide

    Mpa

    32

    Sistemụ nrụgide

    Ike nrụgide kacha

    KN

    240
    ike ịdọrọ kacha

    KN

    240
    Ịrụgide ọrịa strok cylinder

    mm (n'ime)

    3000 (118.2)

    Isi Ike

    Ntugharị moto

    ml/r

    107+107
    Oke mmepụta ike

    Kn.m

    85
    Ọsọ na-arụ ọrụ

    rpm

    22
    Ịtụba apịtị dị elu

    rpm

    65

    Chassis

    Obosara efere crawler

    mm (n'ime)

    600 (23.6)
    Ogologo chassis

    mm (n'ime)

    4550 (179.3)
    Ọsọ njem

    m (ft) /h

    3200 (10500)
    Ụdị moto na-eme njem

     

    TM60

    Mast

    Akaekpe na aka nri

    ogo

    ±5˚
    Ọchịchọ ihu

    ogo

    Ọchịchọ azụ

    ogo

    90˚

    Isi Winch

    Ụdị moto

     

    TM40
    Oke ibuli ike

    KN

    240
    Dayameta waya eriri

    mm (n'ime)

    26 (1.03)
    Ogologo eriri waya

    m (ft)

    43 (141.1)
    Na-ebuli ọsọ

    m (ft)/min

    85 (278.8)

    Winch inyeaka

    Oke ibuli ike

    KN

    70
    Dayameta waya eriri

    mm (n'ime)

    12 (0.47)
    Ogologo eriri waya

    m (ft)

    33 (108.3)
    Na-ebuli ọsọ

    m (ft)/min

    40 (131.2)

    Ọkụ ọkpọkọ

    Ọkpọkpọ akpọchi

    mm (n'ime)

    ø299 (11.8)

    Data arụ ọrụ

    Omimi mkpọpu ihe kacha

    m (ft)

    26 (85.3)
    Dayameta mkpọpu ihe kacha

    m (ft)

    1.2 (4.0)

    Ụgbọ njem

    Ogologo* Obosara* Ogologo

    m(ft)

    12*2.8*3.45(39.4*9.2*11.4)
    Ibu

    n'arọ (lb)

    28000 (61730)
    Parameter ga-agbanwe na-enweghị ọkwa mbụ.

    5203 5204 5205 5206 5207

    Dee ozi gị ebe a ziga anyị ya