Ụlọ mmepụta ihe ozugbo Rotary Crawler na-akwanye Hydraulic Surface Down-The-Hole Drilling Rig Rotary
Ndị ọrụ anyị site na ọzụzụ nwere ahụmahụ.Skilled skilled knowledge, sturdy sense of provider, to meet the support wanted of shoppers for Factory directly Rotary Crawler Mounted Hydraulic Surface Down-The-Hole Drilling Rig Rotary , We welcome new and old shoppers from all places of life to contact us for long run mmekọrịta ụlọ ọrụ na mmezu nke otu!
Ndị ọrụ anyị site na ọzụzụ nwere ahụmahụ.Ọmụma nka nwere nka, nghọta siri ike nke onye na-eweta ya, iji mejuo nkwado nke ndị na-azụ ahịaChina DTH na Drilling rig, Ngwaahịa anyị enweela ezigbo aha maka ịdị mma ha, ọnụahịa asọmpi na mbupu ngwa ngwa n'ahịa mba ụwa.Ugbu a, anyị ji ezi obi na-atụsi anya iso ndị ahịa si mba ofesi na-arụkọ ọrụ dabere na uru otu.
Nkọwapụta
| Aha | Rotary Drilling Rig | ||
| Nlereanya | GR60 | ||
| Injin | Nlereanya | YC4A125Z-T21 | |
| Ike | Kw/rpm | 92/2200 | |
| Sistemụ hydraulic | Ụdị mgbapụta isi | K3V63DT | |
| Oke nrụgide | Mpa | 32 | |
| Sistemụ nrụgide | Ike nrụgide kacha | KN | 140 |
| ike ịdọrọ kacha | KN | 140 | |
| Ịrụgide ọrịa strok cylinder | mm (n'ime) | 2500 (98.5) | |
| Isi Ike | Ntugharị moto | ml/r | 80+80 |
| Oke mmepụta ike | Kn.m | 60 | |
| Ọsọ na-arụ ọrụ | rpm | 22 | |
| Ịtụba apịtị dị elu | rpm | 65 | |
| Chassis | Obosara efere crawler | mm (n'ime) | 500 (19.7) |
| Ogologo chassis | mm (n'ime) | 3650 (143.8) | |
| Ọsọ njem | m (ft) /h | 3200 (10500) | |
| Ụdị moto na-eme njem | TM22 | ||
| Mast | Akaekpe na aka nri | ogo | ±5˚ |
| Ọchịchọ ihu | ogo | 5˚ | |
| Ọchịchọ azụ | ogo | 90˚ | |
| Isi Winch | Ụdị moto | TM40 | |
| Oke ibuli ike | KN | 180 | |
| Dayameta waya eriri | mm (n'ime) | 20 (0.79) | |
| Ogologo eriri waya | m (ft) | 33 (108.3) | |
| Na-ebuli ọsọ | m (ft)/min | 85 (278.8) | |
| Winch inyeaka | Oke ibuli ike | KN | 20 |
| Dayameta waya eriri | mm (n'ime) | 12 (0.47) | |
| Ogologo eriri waya | m (ft) | 33 (108.3) | |
| Na-ebuli ọsọ | m (ft)/min | 40 (131.2) | |
| Ọkụ ọkpọkọ | Ọkpọkpọ akpọchi | mm (n'ime) | ø273 (10.8) |
| Data arụ ọrụ | Omimi mkpọpu ihe kacha | m (ft) | 20 (66) |
| Dayameta mkpọpu ihe kacha | m (ft) | 1.2 (4.0) | |
| Ụgbọ njem | Ogologo* Obosara* Ogologo | m (ft) | 9.2*2.4*3.15 (30.2*7.9*10.4) |
| Ibu | n'arọ (lb) | 15000 (33070) | |
| Parameter ga-agbanwe na-enweghị ọkwa mbụ. | |||
● Maka olulu mmiri mmiri na ntọala ụlọ
● Omimi igwu mmiri20m(66ft)
●Dayameta mkpọ ala 1.2m (4ft)
● Agile Mobility
● Obere nha maka ịrụ ọrụin Oghere dị wararas
GR60 Rotary Drilling Rig
Atụmatụ na uru:
Gookma rotary drilling rig na-agụnye ọtụtụ teknụzụ bụ isi, ọ na-eduga n'usoro nke igwe na-ebu ibu na obere.
1.The GR60 rotary drilling rig bụ nke akwụkwọ akụkọ
imewe, kọmpat Ọdịdị, na a mara mma
n'ozuzu anya.
2.Small size, agile ngagharị, ọ bụ adaba
maka njem, adabara na-arụ ọrụ na warara
na ebe dị ala dị ka uzo, ọwara, ụzọ ụgbọ oloko,
ebe ime ụlọ wdg.
3.Equips na ama ika engine, ọ bụ nke ike ike, kwụsiri ike, obere mmanụ ụgbọala oriri, ala mkpọtụ, ike ịzọpụta na gburugburu ebe obibi nchebe.
4.Hydraulic usoro na isi ihe niile dị elu dị elu, na-eme ka igwe kwụsie ike, ọ dịghị nkwụsị, nnukwu torque na arụmọrụ dị elu.
5.The igwe na-mepụtara elu emebe software na ike analysis software, ọ nwere ike na-egosipụta ọzọ kpọmkwem nchegbu analysis ebe nke ngwaahịa Ọdịdị, ka ebuli ngwaahịa Ọdịdị.
6.Suitable dị iche iche terrain na ala ọnọdụ dị ka eruba ájá oyi akwa, silt stratification na ala mmiri wdg, izute dị iche iche ewu chọrọ.Ọ nwere ike igbapu nkume weathered, ma akọrọ ụzọ na mmiri ụzọ holing usoro nwere ike nakweere.
Ọrụ 7.Stable, ntụkwasị obi dị elu, nkwụsị ala, mmezi dị mma na ịrụzi.
Ngwa
Gookma rotary Drilling rig na-etinye ọtụtụ ebe n'ọtụtụ ọrụ owuwu holing, dị ka okporo ụzọ, okporo ụzọ ụgbọ oloko, ogbugba mmiri n'ubi, akwa mmiri, ọkụ eletrik, nzikọrịta ozi, obodo, ubi, ụlọ, owuwu olulu mmiri wdg, ma na-enweta aha dị elu n'etiti ndị ahịa.
Line mmepụta
Vidiyo mmepụta
Ndị ọrụ anyị site na ọzụzụ nwere ahụmahụ.Skilled skilled knowledge, sturdy sense of provider, to meet the support wanted of shoppers for Factory directly Rotary Crawler Mounted Hydraulic Surface Down-The-Hole Drilling Rig Rotary , We welcome new and old shoppers from all places of life to contact us for long run mmekọrịta ụlọ ọrụ na mmezu nke otu!
Ụlọ ọrụ ozugboChina DTH na Drilling rig, Ngwaahịa anyị enweela ezigbo aha maka ịdị mma ha, ọnụahịa asọmpi na mbupu ngwa ngwa n'ahịa mba ụwa.Ugbu a, anyị ji ezi obi na-atụsi anya iso ndị ahịa si mba ofesi na-arụkọ ọrụ dabere na uru otu.
